Tips for going the FBO route

[K4fxd]

This adapter is very nice. I use it on my car

https://www.vmpperformance.com/VMP-GT-throttle-body-to-GT350-manifold-adapter-plate

Sponsored

 

[I Bleed Ford Blue]

So since there is now ported TB's, does anyone port the GT350 intake manifold?

 

[NGOT8R]

The linked solar TB will still need an adapter to use with a 350 manifold.

Then In that case he’ll want this one.

https://www.solerengineering.com/ford-motor/gt350

 

[5.0Rooster]

Then In that case he’ll want this one.

https://www.solerengineering.com/ford-motor/gt350

And with that one I would still need the VMP adapter ?

 

[K4fxd]

If he buys that one he will need a tune.

 

[K4fxd]

And with that one I would still need the VMP adapter ?

No but you will need a tune

 

[K4fxd]

So since there is now ported TB's, does anyone port the GT350 intake manifold?

The same guys that port the other manifolds, AFR, 1320 junkie ect...

 

[5.0Rooster]

No but you will need a tune

How do I obtain a tune for it?

 

[5.0Rooster]

After adding everything up I Bleed Ford Blue was right. The FPPP 3 is the same cost as all this. What if I were to do the GT350 manifold, VMP adapter, and PMAS CAI no tune. Wait a little and then purchase the 90mm TB. Since the 90mm doesn't require a tune just needs an adapter. Thats correct right?

 

[NGOT8R]

And with that one I would still need the VMP adapter ?

And with that one I would still need the VMP adapter ?

No adapter or tune needed. Just to make sure you’re on the right track, call Soler and ask to speak to Mike. He will set you straight and make sure you get exactly what you need.

 

[I Bleed Ford Blue]

In theory, you could do that. but you won't get much power out of it until you tune it.

 

[NGOT8R]

The same guys that port the other manifolds, AFR, 1320 junkie ect...

No tune needed. It says it in the product description. I never tuned for mine either, I just bolted it on and it’s been running like a champ.

 

[NGOT8R]

In theory, you could do that. but you won't get much power out of it until you tune it.

Agreed.

 

[K4fxd]

No tune needed. It says it in the product description. I never tuned for mine either, I just bolted it on and it’s been running like a champ.

Except you had an 87 mm TB to start with. You have a Bullitt. He has an 80mm. The Solar 85 or ported 80 will work without a tune on a gen 2 gt. But will need an adapter to put it on a GT350 manifold

 

[K4fxd]

What if I were to do the GT350 manifold, VMP adapter, and PMAS CAI no tune.

This, next would be headers. All this and you still don't NEED a tune. If you are not going to add cams or a blower now would be the time to get a tune.

Sponsored