Brembo brake kit

[Bruce Jr]

Has anyone installed these on their car & if so what are your thoughts? (they are on sale for $3700)

Sponsored

 

[CobaltFilly]

I have not, but want to ask - what year mustang are you running/is it base model? And why not just go with the PP1 brakes?
Do you track your car?

 

[Bruce Jr]

I have not, but want to ask - what year mustang are you running/is it base model? And why not just go with the PP1 brakes?
Do you track your car?

It’s a 22 Mach 1, they come standard with front Brembo set but not the rear

 

[CobaltFilly]

It’s a 22 Mach 1, they come standard with front Brembo set but not the rear

Apologies, understood.

 

[sachmo133]

I would love to put the red set on my Mach 1.

 

[jpjr501]

I can't understand why there isn't a rear Brembo caliper kit available that bolt's right up in place of single rear caliper. Really don't want to change spindles, axles, lines, etc.

 

[2morrow]

That kit is pretty pricey for just an end goal of having rear Brembo calipers.

I just upgraded mine to the Bullitt calipers and called it a day

 

[VictorH]

Unless you just like the looks I see no reason to change the stock brakes on the Mach 1. I track my car a fair amount and with good endurance race pads you can get amazing brake performance. By Vbox my car pulls just short of 1.5g under max braking (lap after lap, stock pads will do it once)..
You're not going to better that just because you have rear Brembos.

 

[Bruce Jr]

Unless you just like the looks I see no reason to change the stock brakes on the Mach 1. I track my car a fair amount and with good endurance race pads you can get amazing brake performance. By Vbox my car pulls just short of 1.5g under max braking (lap after lap, stock pads will do it once)..
You're not going to better that just because you have rear Brembos.

Yup I want the look as well as stopping power

 

[VictorH]

Fair enough. If you want nice calipers in a performance rear set up you might look at AP racing. They might not have rear handbrake though, not sure.
Check out these guys. Might not be for you but worth looking at.

https://www.essexparts.com/

 

[RAVAGE88]

Has anyone installed these on their car & if so what are your thoughts? (they are on sale for $3700)

This is an awesome kit, will be upgrading mine as well. You'll need GT350 fit wheels for the rear.

MB

 

[Bruce Jr]

Fair enough. If you want nice calipers in a performance rear set up you might look at AP racing. They might not have rear handbrake though, not sure.
Check out these guys. Might not be for you but worth looking at.

https://www.essexparts.com/

Thanks I’ll look into it

 

[Bruce Jr]

This is an awesome kit, will be upgrading mine as well. You'll need GT350 fit wheels for the rear.

MB

My car has the Handling Pack but it should work, I watch the video of them putting the break set on a regular GT

 

[RAVAGE88]

My car has the Handling Pack but it should work, I watch the video of them putting the break set on a regular GT

What size rotors are standard in the rear of the Mach 1? Are you currently running wheels that are compatible with the offsets used on the GT350?

Note in the kit:

• Due to the increase in rear track width, you must run the 19x10 +35mm (Normal Offset) R350 wheel in the front and the 19x11 +60mm (GT350 Offset) wheel in the rear.

MB

 

[Bruce Jr]

What size rotors are standard in the rear of the Mach 1? Are you currently running wheels that are compatible with the offsets used on the GT350?

Note in the kit:

• Due to the increase in rear track width, you must run the 19x10 +35mm (Normal Offset) R350 wheel in the front and the 19x11 +60mm (GT350 Offset) wheel in the rear.

MB

The brake rotor is 13 inches

Sponsored