Proshop
Well-Known Member
Corn shots!!New Tik Tok Challenge?!! It'll be really popular with the tide pod kids!
![Rolling on the floor laughing :rofl: 🤣](https://cdn.jsdelivr.net/gh/joypixels/emoji-assets@5.0/png/64/1f923.png)
Sponsored
Corn shots!!New Tik Tok Challenge?!! It'll be really popular with the tide pod kids!
100% well worth it! love that thing!Get yourself one of these if you intend on running E constantly. No mess, no more messing around with test tubes and bottles, no more guessing
https://fuel-it.com/products/fuel-it-flex-fuel-kits-ford-mustang-5-0?variant=40077183549579
Yessir. I have since adapted it to my return fuel system with the Aeromotive Sensor adapter. This allows you to run up to a -10AN line in and out, and has a bypass that flows all aditional fuel around the top of the sensor100% well worth it! love that thing!
I have the Lethal stage 1 fuel system. I decided to install the sensor/adapter in the fuel line that goes from the Driver side fuel rail to the pressure regulator. This is an -8AN line. This photo shows it installed completely with the strut tower brace in place. I used the bracket that came with my pressure regulator, and drilled 2 holes in the plastic "Powered by Ford" cover thing to support it. You can't see that part under the Strut Brace.![]()
interesting.....my sensor is circled, and my return fuel system (fore) is on the other side like yours, but I still don't understand what you've done.....
I see the plug/connector for the bluetooth dongle, but where is your Ethanol sensor installed?
Ha! That's a good question, and sense I didn't install it or know what it looks like I couldn't tell youI see the plug/connector for the bluetooth dongle, but where is your Ethanol sensor installed?