Want to see your logs, fast guys N/A.

[Sick03L]

If you log with live wire on the sct4 Id love to see your logs to compare them to mine. Preferably E85 logs.

Sponsored

 

[slowpony]

What kind of lbs per minute do you see on your MAF?

Doing base Logs with my set up and just the base tune I'm at 60.7lbs/min with 93 at 7000 RPM and I'll be spinning to about 7600-7800. Showing a lot of fuel consumption IMO!

 

[Sick03L]

What kind of lbs per minute do you see on your MAF?

Doing base Logs with my set up and just the base tune I'm at 60.7lbs/min with 93 at 7000 RPM and I'll be spinning to about 7600-7800. Showing a lot of fuel consumption IMO!

What are your mods? Ill have to look.

 

[GSLSE20B]

60 is cobra jet and headers

 

[slowpony]

60 is cobra jet and headers

Bingo!

 

[3beeps]

Can anyone PM me their logs, pref with a Lund tune and nGauge? Trying to see what other logs look like compared to mine.

 

[Higgs Boson]

60 lb/min has a loose relationship with 600 rwhp.....if you aren't making 575-615 rwhp then your airflow model (maf curve) is wrong and your fuel trims are working overtime, not a great idea.

1 lb/min of airflow is about 10rwhp IF your maf curve is correct.

 

[Plimmer]

60 lb/min has a loose relationship with 600 rwhp.....if you aren't making 575-615 rwhp then your airflow model (maf curve) is wrong and your fuel trims are working overtime, not a great idea.

1 lb/min of airflow is about 10rwhp IF your maf curve is correct.

Makes sense, I'm pulling 40 lbs on my stock motor, so 60 lbs is a 600 hp motor.

 

[Sick03L]

What's the PID to log for this?

 

[GSLSE20B]

What's the PID to log for this?

MAF lb/m

 

[dubster99]

My MAF with headers and Boss intake is around 50.5 at 7500rpm. Waiting on a revised tune to take it higher.

 

[GSLSE20B]

I have a datalog from a local tuner that shows 33lb/m . Changed to the stock tune shows 46lb/minute ... Bad tune with bad intake timing .. People need to learn what the logs are showing . Don't take someone's word for it ..

 

[Higgs Boson]

I have a datalog from a local tuner that shows 33lb/m . Changed to the stock tune shows 46lb/minute ... Bad tune with bad intake timing .. People need to learn what the logs are showing . Don't take someone's word for it ..

exactly. the maf lb/min is only accurate if the tune is accurate and it sounds like many are not.

 

[dubster99]

If it's not accurate in the tune, wouldn't it drive poorly?

 

[Higgs Boson]

If it's not accurate in the tune, wouldn't it drive poorly?

no because fuel trims. i'd very very surprised if you were actually moving 60 lbs/min without boost.

Sponsored