DB83
Granny Shifter
- Thread starter
- #1
Couple of things I've found with my air lift performance system.
First is, that when going from my max ride height (getting in and out of the garage) at 95 psi in all 4 corners to normal ride height, the system doesn't reach ride height at the first attempt. My normal ride height is set to 50 psi front and 75 psi rear. The rear gets pretty close, usually around 76 or 77 psi, bu the front only gets to around 56 or 57 psi.
When going from max ride height to normal ride height it all drops fairly quick as it should, but then the front jumps back up a little.
Going from aired out to normal ride height isn't a problem, its gets there fine. It's only when going from max height to normal.
Second thing is, what adjustable end links are those of you with the kit using? I'm running the BMR ones, and the fronts are way too long, and the sway bar fouls with the suspension arms, so i need a much shorter adjustable end link, as i honestly don't trust the little one that comes with the kit.
Thanks guys!!
First is, that when going from my max ride height (getting in and out of the garage) at 95 psi in all 4 corners to normal ride height, the system doesn't reach ride height at the first attempt. My normal ride height is set to 50 psi front and 75 psi rear. The rear gets pretty close, usually around 76 or 77 psi, bu the front only gets to around 56 or 57 psi.
When going from max ride height to normal ride height it all drops fairly quick as it should, but then the front jumps back up a little.
Going from aired out to normal ride height isn't a problem, its gets there fine. It's only when going from max height to normal.
Second thing is, what adjustable end links are those of you with the kit using? I'm running the BMR ones, and the fronts are way too long, and the sway bar fouls with the suspension arms, so i need a much shorter adjustable end link, as i honestly don't trust the little one that comes with the kit.
Thanks guys!!
Sponsored