sb1racing
Well-Known Member
- Thread starter
- #1
Heading to Track Soon!
Tuning and Build Coordination by Adam @ Tune+ (www.adamtuned.com)
Turbo Kit by CP-E (www.cp-e.com)
Specs:
2015 Ecoboost A6 PP
TUNE+ Lifetime E-Tune
TUNE+ Auxiliary Fuel Tuning
TUNE+ Transmission Tuning
TUNE+ Dyno Tuning
TUNE+ Denso ITV22 Plugs
TUNE+ UPR Dual Valve Catch Can
TUNE+ Plug and Play 4Bar TMAP Sensor
TUNE+ Mega-Sauce E85 Fuel System
CP-E Twin Scroll EFR Turbo Kit
CP-E Single 3" Exhaust
CP-E Downpipe
Esslinger 12mm Head Studs
Borg Warner 8374 EFR from Full-Race/Tune+
Pande's Performance Built Engine
MAP Sleeved Shortblock w/I-Beam Rods
MAP Stage 5 Ported Head w/+1mm Valves
Viking Shocks from BMR w/Kelly's recommended setup
BMR CB005, TCA045, BK054, TR005, DSL017
DSS Carbon Fiber Drivers from Lethal Performance/Tune+
DSS 1400hp Axles
ATM Intercooler
ATM Silicone Cold Charge Pipe
Watson Racing 6-Point Cage
Dusold Designs Hex Grill
Race Star Dark Star 17x9.5 Rear
Race Star Dark Star 17x4.5 Front
MT ET Street R P305/45R17
MT Sportsman S/R - 28x6.00R17LT
***********************************************************
Old Build Thread
***********************************************************
So it begins!! Build completion is just around the corner now, bit delayed but aren't they always. Car will be hitting the track fairly soon, once some final Aux Tuning is completed and the weather clears!
To start there are no words I can say that even begin to tell my gratitude to Adam @ Tune+!!! The man has spent countless hours coordinating the build of my entire car and just NEVER stops or slows down!! I simply drove my car to him and went back this past week to pick it up. He called all the shots and coordinated everything with my build. Which of course I'm overly ecstatic about to say the least. I mean come on, who doesn't want a daily driver w/remote start that can easily make over 600hp, runs pump gas (E85), still gets almost 30mpg and will blow the tires off on the highway if you want it to!?!?! Car is just sick and there's still WAY more to come, just waiting on the new fuel setup Adam is building as I speak. Then we can get into some serious boost numbers and start seeing those 700hp+ numbers!!
CP-E did has build an amazing EFR Turbo Kit to seamlessly toss this AFR 8374 under the hood and make some power. Craftsmanship of every part of the turbo kit is flawless and worth every penny! Blows my mind this Big Turbo almost spools like stock!! I truly didn't expect it to maintain the crazy boost curve down so low in the RPM's. Twin Scroll is the ticket for sure...
Preliminary Dyno Results & Video, E85 Pump Gas:
Dyno Video on Facebook
(Unfortunately we ran out of fuel and couldn't turn the boost up yet)
*************************************************************
July 29th 2016 -update-
Adam remotely Dyno Tuned my grocery getter (literally) today to a lil over 700hp!! Need to take some time to update everything here but just haven't had time. Now trying to get the car ready for the track this Thursday!! Dyno does't mean much to me, track is where a car is proven
Updates to the car:
TUNE+ E85 Fuel system
CP-E's new Turbo Manifold
CP-E Single Exhaust (that's sound flipping amazing!!)
Pande's Performance that did the new engine rebuild
Esslinger Racing 12mm Studs
*************************************************************
Finally made it out to the track for my first pass on the new combo! Haven't been down the track since October and unfortunately only got to make a single pass. Although I did make it count, see post #2 for details ;)
Tuning and Build Coordination by Adam @ Tune+ (www.adamtuned.com)
Turbo Kit by CP-E (www.cp-e.com)
Specs:
2015 Ecoboost A6 PP
TUNE+ Lifetime E-Tune
TUNE+ Auxiliary Fuel Tuning
TUNE+ Transmission Tuning
TUNE+ Dyno Tuning
TUNE+ Denso ITV22 Plugs
TUNE+ UPR Dual Valve Catch Can
TUNE+ Plug and Play 4Bar TMAP Sensor
TUNE+ Mega-Sauce E85 Fuel System
CP-E Twin Scroll EFR Turbo Kit
CP-E Single 3" Exhaust
CP-E Downpipe
Esslinger 12mm Head Studs
Borg Warner 8374 EFR from Full-Race/Tune+
Pande's Performance Built Engine
MAP Sleeved Shortblock w/I-Beam Rods
MAP Stage 5 Ported Head w/+1mm Valves
Viking Shocks from BMR w/Kelly's recommended setup
BMR CB005, TCA045, BK054, TR005, DSL017
DSS Carbon Fiber Drivers from Lethal Performance/Tune+
DSS 1400hp Axles
ATM Intercooler
ATM Silicone Cold Charge Pipe
Watson Racing 6-Point Cage
Dusold Designs Hex Grill
Race Star Dark Star 17x9.5 Rear
Race Star Dark Star 17x4.5 Front
MT ET Street R P305/45R17
MT Sportsman S/R - 28x6.00R17LT
***********************************************************
Old Build Thread
***********************************************************
So it begins!! Build completion is just around the corner now, bit delayed but aren't they always. Car will be hitting the track fairly soon, once some final Aux Tuning is completed and the weather clears!
To start there are no words I can say that even begin to tell my gratitude to Adam @ Tune+!!! The man has spent countless hours coordinating the build of my entire car and just NEVER stops or slows down!! I simply drove my car to him and went back this past week to pick it up. He called all the shots and coordinated everything with my build. Which of course I'm overly ecstatic about to say the least. I mean come on, who doesn't want a daily driver w/remote start that can easily make over 600hp, runs pump gas (E85), still gets almost 30mpg and will blow the tires off on the highway if you want it to!?!?! Car is just sick and there's still WAY more to come, just waiting on the new fuel setup Adam is building as I speak. Then we can get into some serious boost numbers and start seeing those 700hp+ numbers!!
CP-E did has build an amazing EFR Turbo Kit to seamlessly toss this AFR 8374 under the hood and make some power. Craftsmanship of every part of the turbo kit is flawless and worth every penny! Blows my mind this Big Turbo almost spools like stock!! I truly didn't expect it to maintain the crazy boost curve down so low in the RPM's. Twin Scroll is the ticket for sure...
Preliminary Dyno Results & Video, E85 Pump Gas:
Dyno Video on Facebook
(Unfortunately we ran out of fuel and couldn't turn the boost up yet)
*************************************************************
July 29th 2016 -update-
Adam remotely Dyno Tuned my grocery getter (literally) today to a lil over 700hp!! Need to take some time to update everything here but just haven't had time. Now trying to get the car ready for the track this Thursday!! Dyno does't mean much to me, track is where a car is proven
Updates to the car:
TUNE+ E85 Fuel system
CP-E's new Turbo Manifold
CP-E Single Exhaust (that's sound flipping amazing!!)
Pande's Performance that did the new engine rebuild
Esslinger Racing 12mm Studs
*************************************************************
Finally made it out to the track for my first pass on the new combo! Haven't been down the track since October and unfortunately only got to make a single pass. Although I did make it count, see post #2 for details ;)
Sponsored
Last edited: