Quad tip diffuser?

[FUN2RIDEFAST]

I've got a 2017 PP with Roush axle backs dual pipes but would like to go with the quads. Can anyone recommend a good kit for accomplishing this?

Sponsored

 

[cbrookre]

have not replaced mine, but have seen conversions to the GT350 diffuser and it looks great. That would be where I would start.

 

[FUN2RIDEFAST]

have not replaced mine, but have seen conversions to the GT350 diffuser and it looks great. That would be where I would start.

Thanks, I'll check it out.

 

[DougS550]

I've got a 2017 PP with Roush axle backs dual pipes but would like to go with the quads. Can anyone recommend a good kit for accomplishing this?

I am installing Anderson Composite Carbon Fiber quad rear diffuser this week end.

 

[FUN2RIDEFAST]

I am installing Anderson Composite Carbon Fiber quad rear diffuser this week end.

I just bought new axles so Anderson is out of my price range at the moment. Post pictures when you get er done.

 

[Cobra Jet]

Here ya go, this thread has a lot,of quad tip/diffuser discussion:
https://www.mustang6g.com/forums/threads/quad-tips.73292/#post-1669322

 

[DougS550]

I just bought new axles so Anderson is out of my price range at the moment. Post pictures when you get er done.

They are expensive but nice looking. I plan on doing my FI next winter. My story on problems with expensive, defective, not molded correctly, misaligning tabs ETC, ETC, ETC. I'm a perfectionist and expect when I pay exorbitant prices to get parts which are OEM fit, NOT. it's crazy. O well, that's life.

 

[FUN2RIDEFAST]

Here ya go, this thread has a lot,of quad tip/diffuser discussion:
https://www.mustang6g.com/forums/threads/quad-tips.73292/#post-1669322

Thanks

 

[DougS550]

Does Anyone put Heat Tape above their exhaust tips on the rear diffuser to prevent heat damage caused by exhaust Muffler tips which go through the rear diffuser? Thanks

 

[Whitedevil95]

Basically it seems like its either the GT350 rear valance or the MP Concepts 2018+ Style valance.

 

[Vco]

Does Anyone put Heat Tape above their exhaust tips on the rear diffuser to prevent heat damage caused by exhaust Muffler tips which go through the rear diffuser? Thanks

already melted one diffuser

You need to make sure tips has enough clearance from the top and they stuck out far enough

 

[ScottyRyan2018]

already melted one diffuser

You need to make sure tips has enough clearance from the top and they stuck out far enough

What type of exhaust do you have and what tips are those?

 

[DougS550]

What type of exhaust do you have and what tips are those?

I have a 19 PP1 with active Quad tip exhaust. I just finished installing my Anderson Composite CF rear diffuser. I am disappointed I had to make new mounting brackets,cut and modify OEM brackets, tabs ETC to get it to fit correctly. I have been cutting and modifying these for 4 days. Their is No reason they should sell a part which needed so much work to get it to fit without having to make such major changes for the car owne to have to do.

 

[Vco]

What type of exhaust do you have and what tips are those?

I have the roush catback kit . Previous owner installed it but he did not install the tip so there was 20 cm between exhaust and the fake tips that comes with the diffuser . Result melted diffuser after 15 mins of high revs .


These tips are aftermarket tips . The shop I found d had the borla quad tip chrome color and these ones which is wrapped with carbon fiber. I liked the look of these so chosen this one

 

[ScottyRyan2018]

@Vco Thanks for the reply. Yeah, that made a mess of that diffuser! I am trying to find some better looking than the stock GT exhaust tips while still keeping the stock active exhaust. Not having the car yet means I don't have a clue as to what can be done about that so I am kind of snooping around ahead of time.

Sponsored