MPSS 335/30/20

[Todd15Fastback]

Anyone run this size tire out back yet on the S550's? Says it would fit 11.5-12.5 width wheels. I have 11" wide.

Been looking at tires to see what other brands are out there. This is within .3" in diameter of my 305/35/20 and would good out back. Not sure if there would be any rubbing issues or not?

Anyone have thoughts on this?

Sponsored

 

[Need4SpeedMotors]

Todd on a regular S550 no, ive tossed the idea to test fit a pair, but the issue is those Michelin are oversized tires so they sit wide, so they may cause some rubbing on the inner strut or the inner fender bro.

 

[Todd15Fastback]

Todd on a regular S550 no, ive tossed the idea to test fit a pair, but the issue is those Michelin are oversized tires so they sit wide, so they may cause some rubbing on the inner strut or the inner fender bro.

That's what I am afraid of. I am running -2.2 degrees of camber out back.

Will be curious if anyone goes with this size and what adjustments need to be made.

 

[Need4SpeedMotors]

I may talk to the owner grab a set test fit it and see if its possible.

 

[Todd15Fastback]

I may talk to the owner grab a set test fit it and see if its possible.

That would be freaking sweet! that wide of tire on this car would be tits

 

[Need4SpeedMotors]

It would def drop some jaws dude.

 

[Todd15Fastback]

It would def drop some jaws dude.

Oh yeah...

 

[Need4SpeedMotors]

Pair a Ingot S550 and a set of Work wheels and we got a contender lol

 

[Streetcar]

Any updates and could you massage the fenders. I am waiting to buy one until I know a 335 will fit.

 

[Need4SpeedMotors]

We wont know until someone tries it.

 

[Streetcar]

I wonder if a +58 20x12 335/30r20 will work. I know it will be close but with some fener massaging it may work.

 

[Need4SpeedMotors]

its too far in youll need something like a ET 50-52

 

[Streetcar]

its too far in youll need something like a ET 50-52

Good info, it really will be mm close.

 

[TXSean]

The only car I know of running 335's is fatherford, he has a build thread here.

 

[executiV]

A little info here: I tried 325/30 Dunlops on the S550 and the wheel I used is a 20x12 +45. You can barely get your finger between the inside of the wheel and the strut, also the support bracket (some aluminum piece, dunno what its called) towards the front of the tire. This setup also stuck out about an inch or so.

Sponsored