Ignition coils for gen 3 coyote

[Gallop]

Hi all from sunny Australia. I was wondering any recommendations for after market ignition coils for a forced induction gen 3 motor the stock ones keep breaking down after 6 months or so

Sponsored

 

[Cory S]

Hi all from sunny Australia. I was wondering any recommendations for after market ignition coils for a forced induction gen 3 motor the stock ones keep breaking down after 6 months or so

It's not the coils...... You have something else going on.

 

[ice445]

Are you trying to run stock plug gaps with boost?

 

[Gallop]

Are you trying to run stock plug gaps with boost?

No running ngk iridium gapped for boost

 

[Gallop]

It's not the coils...... You have something else going on.

Hope not but last time I had misfire detected number 7 coil replaced ran fine for 6 months, I am thinking heat might be making them break down

 

[Cory S]

Hope not but last time I had misfire detected number 7 coil replaced ran fine for 6 months, I am thinking heat might be making them break down

People road race these cars in extreme heat 90-100°F with oil temps in the 270’s and cylinder head temps above 245° without coil failures.

 

[Gallop]

Fair enough sounds like it's not heat then

 

[Livernois Motorsports]

In our builds, we always have used stock. The stock coils are all we use on coyote builds we have. There are cars makin' 1200+ on stock coils. If you are burning through them then there have to be some other issues going on

Sponsored