BenjiSayRuh
Active Member
- Thread starter
- #1
Hello Fellow Mustang Owners/Researchers,
The purpose of this thread is to follow my build progress as well as keep a detailed list of what is installed on the car.
This car is coming from a completely stock set up except for a basic tune from VMP as well as a Rousch intake.
Right now, the car is sitting at 69K miles and no mechanical issues at all.
We started the build on Feb 24th 2024. This has been extensive learning process for both myself
and my installer who builds fox body mustangs.
Here is a detailed list of what is/has been installed on the car so far:
Hellion twin turbo - top mount - 62mm turbo kit
Borla Atak with X pipe
MGW race spec shifter
Mcleod RXT clutch 1000HP
aluminum 1 PC drive shaft
Upgraded Half Shaft - both left and right
1000 CC injectors - HIGH-Z impedance
VMP billet Fuel Rails
Steeda Stop the hop kit
Steeda rear diff bushings
Turbosmart Eboost2 boost controller with 3d printed vent insert
VMP boost a pump
NGK 6510 Spark Plugs
rear tires - 285 firehawk indy 500's - installed way before the thoughts of adding the above parts.
At this point, we are working on installing the Eboost2 controller, injectors, fuel rail, and sparkplugs.
This should be complete by this weekend.
In regards to a tune, we are working with Adam @ Core Tuning out of NY.
Obviously, this car will not be able to hold traction with the current rear tire set up (listed above).
therefore, i am open to any suggestions on rear tire setups for rolling street pulls.
thanks in advance for any advice, comments, or concerns that many of you might see!
- BenjiSayRuh
The purpose of this thread is to follow my build progress as well as keep a detailed list of what is installed on the car.
This car is coming from a completely stock set up except for a basic tune from VMP as well as a Rousch intake.
Right now, the car is sitting at 69K miles and no mechanical issues at all.
We started the build on Feb 24th 2024. This has been extensive learning process for both myself
and my installer who builds fox body mustangs.
Here is a detailed list of what is/has been installed on the car so far:
Hellion twin turbo - top mount - 62mm turbo kit
Borla Atak with X pipe
MGW race spec shifter
Mcleod RXT clutch 1000HP
aluminum 1 PC drive shaft
Upgraded Half Shaft - both left and right
1000 CC injectors - HIGH-Z impedance
VMP billet Fuel Rails
Steeda Stop the hop kit
Steeda rear diff bushings
Turbosmart Eboost2 boost controller with 3d printed vent insert
VMP boost a pump
NGK 6510 Spark Plugs
rear tires - 285 firehawk indy 500's - installed way before the thoughts of adding the above parts.
At this point, we are working on installing the Eboost2 controller, injectors, fuel rail, and sparkplugs.
This should be complete by this weekend.
In regards to a tune, we are working with Adam @ Core Tuning out of NY.
Obviously, this car will not be able to hold traction with the current rear tire set up (listed above).
therefore, i am open to any suggestions on rear tire setups for rolling street pulls.
thanks in advance for any advice, comments, or concerns that many of you might see!
- BenjiSayRuh
Sponsored