Hello all,
I was set to buy a take-off PP1 spoiler locally and the seller just informed me he noticed there is water trapped inside of it. He sent a video of the water sloshing around inside the spoiler. Can the stock PP1 spoiler be disassembled to drain it? I've never heard of water getting...
Hi everyone, I've done a lot of reading and searching and couldn't find exactly what I'm looking for. I'm wondering what would be needed if I removed the rear portion of the exhaust (mufflers and connected pipes/hangers) behind the resonator delete pipe (or before) for track days at the drag...
We had a track rental event yesterday at Houston Raceway Park. I had gone a best of 11.32 @ 122.9 in great weather on stock tune so I was hoping for some consistent 11.0 passes after the Lund e85 tune and resonator delete x-pipe.
I started the day running 11.02 @ 124. My next run, I didn't get...
I've researched power modifications, what people have added at the dyno, and what people have seen as far as improvement at the track. This isn't a thread asking specifically for any of that.
I'm curious what the choke points for power are on the stock gen 3 motor. After market CAI kits don't...
Hello everyone,
I need some opinions please. I am looking at the SVE R357s 19x10 / 19x11 for my Kona Blue '19 GT with black accent package. I was originally looking at gloss black to match the black accents but the graphite look really good and I think they'd work well with the Kona Blue. I was...
Hi everyone, I checked the large 10R80 issues and solutions thread and didn't see anything exactly like I have experienced a few times now.
On two separate occasions now in the last two weeks, while idling in a drive thru, the car has exhibited an add behavior. With the selector in D and in...
Hello all,
I have searched here and Googled and have found very little real-world acceleration test results for the difference between heavier and lighter wheel and tire combinations. Most of what I have read has been rules of thumb, estimates, and repeated figures with no actual data to back it...
Hey everyone, I am curious to hear people's experiences with launching at the drag strip using foot brake and ebrake versus just foot brake. I can rev to about 2000 rpm in my 2019 A10 GT - stock with MT ET Street bias ply DRs on foot brake without pushing the car. I did some testing today and I...
HRP in Baytown is having a DR/Slick only T&T on Saturday from 9am to 5pm. $75 for tech card, $10 to watch. Anyone going? It's going to be a bit cold out there but I plan on going to race.
Hi everyone, can anyone share a setup they have that allows for good traction on the street in drag mode through the first 3 gears for an N/A car? Every once in a while, I'd like to be able to get into it from a dig or very slow roll in 1st and not have to feather the throttle.
I am on stock...
We were gifted with really great air last night here in the Houston area when the local drag strip was open. The trade-off was that it was an odd night out there with so many cars watering and oiling down the track. I was there from 6pm to 11:45 pm and only made 2 passes. Best run of the night...
Hello everyone, since the last person who was maintaining the fast list has moved on and that post used a fixed image, I will help take up the torch so to speak. We will use a shared Google sheet to track the list. Over time, if it becomes too much for one person, I can give edit rights to...
What do you guys think of having the 1/4 mile fast list as a link to a Google Sheet instead of the static image? We could have it open for all to view and I could allow a few others to help update it by allowing certain people edit rights.
Thoughts? I typed everything based on the last fast...
Hello everyone,
I installed the BMR CB010 lockout kit and CB762 braces last weekend. I had also purchased the SCB766 to put in while I had everything apart. The sleeves slid right in to the front holes for the cradle bolts but I could not get the rears in to save my life. I used grease, more...
I went to the track tonight and was the first time running drag radials on this car. I can't say enough about how impressive this car is. As the title says, I ran 11.55 @ 121.5 and backed it up with an 11.56 @ 121.1. There is room for improvement in the 60' times of 1.85/1.86 as there was some...
Hey everyone,
We are catching some cool weather here in Houston so I will be heading to the track tomorrow night. I have some 26x11.50-17 MT ET Streets from my last Mustang on 17x9 bullets. Since these tires aren't sold any more, I can't find much info on what my starting pressures should be. I...
Hi everyone,
I have read a lot about IRS improvement mods but I have not been able to find specific details on how to test if the BMR or Steeda alignment kits are actually needed. Descriptions state that some cars' IRS subframes were not aligned left to right from factory. Would a good test be...
Hey everyone, I searched both here and online and couldn't find anything specific to what I am looking for. I don't plan on getting a tune anytime soon (so no handheld tuner yet) but I am very interested in datalogging IATs among other things on my 2019 GT. This is sheerly out of curiosity. I...
Hey everyone, this is weird to even type but when I got my car a week or 2 ago (2019 off the lot), I noticed a spider web on one of the wheels but didn't think much of it. Didn't see anything of concern under the hood. Well, car was cleaned up before I took it home and no signs of webs. A few...