Anyone running square setup?

[BA939P]

Considering getting a new set of wheels with the 19x11 square setup with 305tires, but couldn't find much information through searching. Can anyone share your wheel spec with square setup？ Much appreciated.

Sponsored

 

[jmn444]

just need extended front studs and 25mm spacers and can run 19x11 with 50mm offset square and rotatable.

 

[TxWar26]

I went with 19x9.5 all around. Tires 265/30 19inch. I love it. I went this route because i don't plan on lowering my ride. If I did i would've done 265/25.

 

[db252]

Not a GT350 but if I can do it, you easily can. Just like stated above, 305/30/19 squared with extended ARP studs in front with a 20mm spacer and 52 offset X 4 for me. I run this only for track but no reason you can't run it daily. No rub at all but I'm also -3.5 camber up front but I could easily bring it back out with no rubbing still. Your 350 has much more play room up in front.

 

[dem00n]

Look into Apex Wheels, they sell wheels that work for square on a GT350.

 

[GT350HE]

I went with Apex SM-10 19x11" ET52 square setup. 25mm spacer on the front with extended studs. I know a few others that run this setup no issues.

 

[StlDocGT350]

I’m running a square set up with 305s. You don’t need spacers or extended studs. Talk to 50 Deep on here with signature wheels. He will take care of you. Hands down the best wheels period

 

[lightrules]

I’m running a square set up with 305s. You don’t need spacers or extended studs. Talk to 50 Deep on here with signature wheels. He will take care of you. Hands down the best wheels period

no he's going to need extended studs if he's got a non-r and wants to run one inch spacers up front...

 

[StlDocGT350]

no he's going to need extended studs if he's got a non-r and wants to run one inch spacers up front...

No he won’t. I have a “non-R” and don’t have spacers or extended studs. Why do people want to argue with what is literally on my car??

 

[StlDocGT350]

If he WANTS to run a spacer, then maybe he needs extended studs. That, I have no idea about. But you do not NEED either a spacer or extended studs if you don’t want

 

[ModularKid21]

The offset just has to be right. I think lightrules was assuming the op was wanting a rotatable square set up, which would require an offset in the 50’s, which would absolutely require a spacer

 

[lightrules]

No he won’t. I have a “non-R” and don’t have spacers or extended studs. Why do people want to argue with what is literally on my car??

you're running square?

 

[StlDocGT350]

The offset just has to be right. I think lightrules was assuming the op was wanting a rotatable square set up, which would require an offset in the 50’s, which would absolutely require a spacer

The OP didn’t mention rotatable. That is a different case

 

[StlDocGT350]

you're running square?

Yes.

 

[Joe Mac]

The offset just has to be right. I think lightrules was assuming the op was wanting a rotatable square set up, which would require an offset in the 50’s, which would absolutely require a spacer

I have 305's on all corners factory rims. No spacers ,looks and drives great

Sponsored